Chrysler 2015 Town & Country Owner'S Manual Download Page 590

Page: 590 / 726

on the ground. This will provide the best positioning

of the kit when injecting the sealant into the deflated

tire and running the air pump. Move the vehicle as

necessary to place the valve stem in this position

before proceeding.

3. Place the transmission in PARK (auto transmission) or

in Gear (manual transmission) and turn Off the igni-

tion.

4. Set the parking brake.

(B) Setting Up To Use Tire Service Kit:

1. Push in the Mode Select Knob (5) and turn to the

Sealant Mode position.

2. Uncoil the Sealant Hose (6) and then remove the cap

from the fitting at the end of the hose.

3. Place the Tire Service Kit flat on the ground next to the

deflated tire.

4. Remove the cap from the valve stem and then screw

the fitting at the end of the Sealant Hose (6) onto the

valve stem.

5. Uncoil the Power Plug (8) and insert the plug into the

vehicle’s 12 Volt power outlet.

NOTE:

Do not remove foreign objects (e.g., screws or

nails) from the tire.

•

Always start the engine before turning ON the Tire

Service Kit.

NOTE:

Manual transmission vehicles must have the

parking brake engaged and the shift lever in NEUTRAL.

•

After pressing the Power Button (4), the sealant (white

fluid) will flow from the Sealant Bottle (1) through the

Sealant Hose (6) and into the tire.

588 WHAT TO DO IN EMERGENCIES

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands