Chrysler 2015 Town & Country Owner'S Manual Download Page 25

Page: 25 / 726

(optional), power sliding doors, Remote Start feature

(optional). Some features can be programmed to the

customers preferences. For example, flash headlights or

sound horn on LOCK.

Remote Unlock Doors And Liftgate

Push and release the UNLOCK button on the RKE

transmitter once to unlock the driver’s side or twice to

unlock all doors and liftgate. This will also turn on the

Illuminated Entry system.

Remote Key Unlock On First Press

This feature lets you program the system to unlock either

the driver’s side, or all doors, on the first push of the

UNLOCK button on the RKE transmitter.

NOTE:

•

For vehicles equipped with an Electronic Vehicle Infor-

mation Center (EVIC), refer to “Electronic Vehicle Infor-

mation Center (EVIC)/Personal Settings (Customer-

Programmable Features)” in “Understanding Your

Instrument Panel” for further information.

Key Fob With Seven-Button RKE Transmitter

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands