Chrysler 2015 Town & Country Owner'S Manual Download Page 508

Page: 508 / 726

Anti-Lock Brake Warning Light

The “Anti-Lock Brake Warning Light” moni-

tors the anti-lock brake system. The light will

come on when the ignition switch is turned to

the ON position and may stay on for as long as

four seconds.
If the “Anti-Lock Brake Warning Light” remains on or

comes on while driving, it indicates that the anti-lock

portion of the brake system is not functioning and that

service is required. However, the conventional brake

system will continue to operate normally if the “Brake

Warning Light” is not on.
If the “Anti-Lock Brake Warning Light” is on, the brake

system should be serviced as soon as possible to restore

the benefits of anti-lock brakes. If the “Anti-Lock Brake

Warning Light” does not come on when the ignition

switch is turned to the ON position, have the bulb

repaired as soon as possible.
If both the “Brake Warning Light” and the “Anti-Lock

Brake Warning Light” remain on, the ABS and Electronic

Brake Force Distribution (EBD) systems are not function-

ing. Immediate repair to the ABS system is required.

Consult with your authorized dealer service center as

soon as possible.

Traction Control System (TCS)

The Traction Control System (TCS) monitors the amount

of wheel spin of each of the driven wheels. If wheel spin

is detected, brake pressure is applied to the slipping

wheel(s) and engine power is reduced, to provide en-

hanced acceleration and stability. A feature of the TCS

system, Brake Limited Differential (BLD), functions simi-

lar to a limited slip differential and controls the wheel

spin across a driven axle. If one wheel on a driven axle is

506 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands