Chrysler 2015 Town & Country Owner'S Manual Download Page 147

Page: 147 / 726

NOTE:

If the vehicle speed is greater than 10 mph

(16 km/h) the folding feature will be disabled.
If the mirrors are in the folded position, and vehicle

speed is equal or greater than 10 mph (16 km/h), they

will automatically unfold.

Resetting The Power Folding Outside Mirrors

You may need to reset the power folding mirrors if the

following occurs:

•

The mirrors are accidentally blocked while folding.

•

The mirrors are accidentally manually folded/

unfolded.

•

The mirrors come out of the unfolded position.

•

The mirrors shake and vibrate at normal driving

speeds.

To reset the power folding mirrors: Fold and unfold them

by pressing the button. (This may require multiple button

pushes). This resets them to their normal position.

Power Folding Mirror Switch

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands