Chrysler 2015 Town & Country Owner'S Manual Download Page 27

Page: 27 / 726

•

For vehicles not equipped with the EVIC, perform the

following steps:

1. Perform this operation while standing outside the

vehicle.

2. Push the LOCK button on a programmed RKE trans-

mitter for at least 4 seconds, but no longer than 10

seconds. Then, push the PANIC button while still

holding the LOCK button.

3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle by push-

ing the LOCK button on the RKE transmitter with the

ignition switch in the OFF position and the Key Fob

removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pushing the LOCK button on the RKE transmit-

ter while you are in the vehicle will activate the Vehicle

Security Alarm. Opening a door with the Vehicle Security

Alarm activated will cause the alarm to sound. Push the

UNLOCK button to deactivate the Vehicle Security

Alarm.

Using The Panic Alarm

To turn the Panic Alarm feature on or off, push and hold

the PANIC button on the RKE transmitter for at least one

second and release. When the Panic Alarm is on, the

headlights and park lights will flash, the horn will pulse

on and off, and the interior lights will turn on.
The Panic Alarm will stay on for three minutes unless

you turn it off by pushing the PANIC button a second

time or if the vehicle is driven above 5 mph (8 km/h).

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands