Chrysler 2015 Town & Country Owner'S Manual Download Page 430

Page: 430 / 726

TECHNOLOGY IS NOT LIABLE FOR ANY INJURIES

OR DAMAGES TO PERSONS OR PROPERTY RESULT-

ING FROM THE USE OF, OR ANY FAILURE OR DE-

FECT IN, THE PRODUCT, NOR IS UNWIRED LIABLE

FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT,

INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PU-

NITIVE OR OTHER DAMAGES OF ANY KIND OR

NATURE WHATSOEVER. Some states and jurisdictions

may not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation may not

apply to you. This warranty gives you specific legal

rights. You may also have other rights, which vary from

jurisdiction to jurisdiction.

What Will Unwired® Do?

Unwired®, at its option, will

repair or replace any defective Product. Unwired® re-

serves the right to replace any discontinued Product with

a comparable model. THIS WARRANTY IS THE SOLE

WARRANTY FOR THIS PRODUCT, SETS FORTH YOUR

EXCLUSIVE REMEDY REGARDING DEFECTIVE

PRODUCTS, AND IS IN LIEU OF ALL OTHER WAR-

RANTIES (EXPRESS OR IMPLIED), INCLUDING ANY

WARRANTY OR MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.
If you have any questions or comments regarding your

Unwired® wireless headphones, please phone 1-888-293-

3332 or email [email protected].
You may register your Unwired® wireless headphones

online at www.unwiredtechnology.com or by phone at

1-888-293-3332.

System Information

Shared Modes

This allows the VES™ to output radio sources to the

headphones and the radio to output VES™ sources to the

vehicle speakers. When the radio and VES™ channel 1 or

2 are in the same (shared) mode, a VES™ icon will be

428 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands