Chrysler 2015 Town & Country Owner'S Manual Download Page 550

Page: 550 / 726

TPMS Low Pressure Warnings

The “Tire Pressure Monitoring Telltale Light” will illumi-

nate in the instrument cluster, and an audible chime will

be activated when one or more of the four active road tire

pressures are low. In addition, the EVIC will display a

“LOW TIRE” message and a graphic display of the

pressure value(s) with the low tire(s) flashing. An

Inflate

Tire to XX

message will also be displayed.

Should a low tire condition occur on any of the four

active road tire(s), you should stop as soon as possible,

and inflate the low tire(s) that is flashing on the graphic

display to the vehicle’s recommended cold tire pressure

value as shown in the

Inflate Tire to XX

message.

NOTE:

When filling warm tires, the tire pressure may

need to be increased up to an additional 4 psi (30 kPa)

above the recommended cold placard pressure in order

to turn the Tire Pressure Monitoring Telltale Light off.

The system will automatically update, the graphic dis-

play of the pressure value(s) will stop flashing, and the

“Tire Pressure Monitoring Telltale Light” will extinguish

once the updated tire pressure(s) have been received.

NOTE:

The vehicle may need to be driven for up to 20

minutes above 15 mph (24 km/h) to receive this infor-

mation.

SERVICE TPM SYSTEM Message

The “Tire Pressure Monitoring Telltale Light” will flash

on and off for 75 seconds, and remain on solid when a

system fault is detected. The system fault will also sound

a chime. The EVIC will display a “SERVICE TPM SYS-

TEM” message for a minimum of five seconds. This

message is then followed by a graphic display, with

- -

place of the pressure value(s) indicating which TPMS

Sensor(s) is not being received.

548 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands