Chrysler 2015 Town & Country Owner'S Manual Download Page 252

Page: 252 / 726

To Deactivate

A soft tap on the brake pedal, pushing the CANCEL

button, or normal brake pressure while slowing the

vehicle will deactivate the Electronic Speed Control with-

out erasing the set speed from memory.
Pressing the ON/OFF button or turning the ignition

switch OFF erases the set speed from memory.

To Resume Speed

To resume a previously set speed, push the RES (+)

button and release. Resume can be used at any speed

above 20 mph (32 km/h).

To Vary The Speed Setting

To Increase Speed

When the Electronic Speed Control is set, you can in-

crease speed by pushing the RES (+) button.

The speed increment shown is dependant on the chosen

speed unit of U.S. (mph) or Metric (km/h):

U.S. Speed (mph)

•

Pressing the RES (+) button once will result in a 1 mph

increase in set speed. Each subsequent tap of the

button results in an increase of 1 mph.

•

If the button is continually pressed, the set speed will

continue to increase until the button is released, then

the new set speed will be established.

Metric Speed (km/h)

•

Pressing the RES (+) button once will result in a

2 km/h increase in set speed. Each subsequent tap of

the button results in an increase of 2 km/h.

•

If the button is continually pressed, the set speed will

continue to increase until the button is released, then

the new set speed will be established.

250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands