Chrysler 2015 Town & Country Owner'S Manual Download Page 497

Page: 497 / 726

Transmission Gear Position

Display

Actual Gear(s) Allowed

1–2

1–3

1–4

1–5

1–6

NOTE:

To select the proper gear position for maximum

deceleration (engine braking), tap the shift lever to the

left (-) repeatedly as the vehicle slows. The transmission

will shift to the range from which the vehicle can best be

slowed down.

Overdrive Operation

The automatic transmission includes an electronically

controlled Overdrive (sixth gear). The transmission will

automatically shift into Overdrive if the following con-

ditions are present:

•

The shift lever is in the DRIVE position.

•

The transmission fluid has reached an adequate tem-

perature.

•

The engine coolant has reached an adequate tempera-

ture.

•

The vehicle speed is sufficiently high.

•

The driver is not heavily pressing the accelerator.

Torque Converter Clutch

A feature designed to improve fuel economy has been

included in the automatic transmission on your vehicle.

A clutch within the torque converter engages automati-

cally at calibrated speeds. This may result in a slightly

different feeling or response during normal operation in

the upper gears. When the vehicle speed drops or during

some accelerations, the clutch automatically disengages.

STARTING AND OPERATING 495

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands