Chrysler 2015 Town & Country Owner'S Manual Download Page 341

Page: 341 / 726

Once the RIGHT button has been selected for

the desired submenu list, follow the EVIC

prompts to properly select the desired sub-

menu EVIC features

•

BACK Button

Push and release the BACK button to scroll

back to a previous menu or sub-menu.

Electronic Vehicle Information Center (EVIC)
Displays

The EVIC display consists of three sections:
1. The top line where compass direction and outside

temperature are displayed.

2. The main display area where the menus and pop up

messages are displayed.

3. The reconfigurable telltales section below the odom-

eter line.

The main display area will normally display the main

menu or the screens of a selected feature of the main

menu. The main display area also displays

pop up

messages that consist of approximately 60 possible warn-

ing or information messages. These pop up messages fall

into several categories:

•

Five Second Stored Messages

When the appropriate conditions occur, this type of

message takes control of the main display area for five

seconds and then returns to the previous screen. Most of

the messages of this type are then stored (as long as the

condition that activated it remains active) and can be

reviewed from the

Messages

main menu item. As long

as there is a stored message, an

will be displayed in the

UNDERSTANDING YOUR INSTRUMENT PANEL 339

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands