Chrysler 2015 Town & Country Owner'S Manual Download Page 549

Page: 549 / 726

•

For each subsequent ignition switch cycle, a chime will

sound, the “Tire Pressure Monitoring Telltale Light”

will flash on and off for 75 seconds and then remain on

solid.

•

Once you repair or replace the original road tire and

reinstall it on the vehicle in place of the compact spare

tire, the TPMS will automatically update, and the “Tire

Pressure Monitoring Telltale Light” will turn off as

long as no tire pressure is below the low-pressure

warning limit in any of the four active road tires.

NOTE:

The vehicle may need to be driven for up to 20

minutes above 15 mph (24 km/h) for the TPMS to receive

this information.

Premium System — If Equipped

The TPMS uses wireless technology with wheel rim-

mounted electronic sensors to monitor tire pressure lev-

els. Sensors mounted to each wheel as part of the valve

stem transmit tire pressure readings to the Receiver

Module.

NOTE:

It is particularly important to regularly check

and maintain proper tire pressure in all the tires.
The Premium TPMS consists of the following compo-

nents:

•

Receiver Module

•

Four TPMS Sensors

•

Various TPMS messages, which display in the Elec-

tronic Vehicle Information Center (EVIC), and graphics

displaying tire pressures

•

TPMS Telltale Warning Light

STARTING AND OPERATING 547

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands