Chrysler 2015 Town & Country Owner'S Manual Download Page 389

Page: 389 / 726

another selection. Holding either button will bypass

stations without stopping, until you release it.

SCAN Button

Pushing the SCAN button causes the tuner to search for

the next channel, pausing for eight seconds before con-

tinuing to the next. To stop the search, push the SCAN

button a second time.

INFO Button

Pushing the INFO button will cycle the display informa-

tion between Artist, Song Title, and Composer (if avail-

able). Also, pushing and holding the INFO button for an

additional three seconds will make the radio display the

Song Title all of the time (push and hold again to return

to normal display).

RW/FF

Pushing the RW (Rewind) or FF (Fast Forward) buttons

causes the tuner to search for the next channel in the

direction of the arrows.

TUNE Control (Rotary)

Turn the rotary TUNE/SCROLL control knob clockwise

to increase or counterclockwise to decrease the channel.

MUSIC TYPE Button

Pushing this button once will turn on the Music Type

mode for five seconds. Pushing the MUSIC TYPE button

or turning the TUNE/SCROLL control knob within five

seconds will allow the program format type to be se-

lected.
Toggle the MUSIC TYPE button again to select the music

type.

UNDERSTANDING YOUR INSTRUMENT PANEL 387

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands