Chrysler 2015 Town & Country Owner'S Manual Download Page 243

Page: 243 / 726

Intermittent Wiper System

Use the intermittent wiper when weather conditions

make a single wiping cycle with a variable pause be-

tween cycles desirable. Rotate the end of the multifunc-

tion lever to the first detent position, and then turn the

end of the lever to select the desired delay interval. There

are five delay settings, which allow you to regulate the

wipe interval from a minimum of one cycle every second

to a maximum of approximately 36 seconds between

cycles. The delay intervals will double in duration when

the vehicle speed is 10 mph (16 km/h) or less.

Windshield Wiper Operation

Rotate the end of the lever upward, to the first detent past

the intermittent settings for low-speed wiper operation.

Rotate the end of the lever upward to the second detent

past the intermittent settings for high-speed wiper opera-

tion.

Windshield Washers

To use the Washer, push on the end of the lever to the

second detent and hold while spray is desired. If the lever

is pushed while on the intermittent setting, the wipers

will turn on and operate for several wipe cycles after the

lever is released, and then resume the intermittent inter-

val previously selected. If the lever is pushed while the

wipers are in the off position, the wipers will operate

several wipe cycles, then turn off.

Mist Feature

Press the end of the multifunction lever inward (toward

the steering column) to the first detent and release for a

single wiping cycle.

NOTE:

The mist feature does not activate the washer

pump; therefore, no washer fluid will be sprayed on the

windshield. The wash function must be used in order to

spray the windshield with washer fluid.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands