Chrysler 2015 Town & Country Owner'S Manual Download Page 239

Page: 239 / 726

Turn Signal Warning

If the vehicle electronics sense that the vehicle has

traveled at over 18 mph (29 km/h) for about 1 mile

(1.6 km) with the turn signals on, a chime will sound to

alert the driver.

Lane Change Assist

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

High/Low Beam Switch

When the headlights are turned on, pushing the multi-

function lever toward the instrument panel will switch

from low beams to high beams. Pulling back to the

neutral position returns the headlights to the low beam

operation.

Flash-To-Pass

You can signal another vehicle with your headlights by

lightly pulling the multifunction lever toward you. This

will cause the headlights to turn on at high beam and

remain on until the lever is released.

Automatic High Beam — If Equipped

The Automatic High Beam system provides increased

forward lighting at night by automating high beam

control through the use of a digital camera mounted on

the inside rearview mirror. This camera detects vehicle

specific light and automatically switches from high

beams to low beams until the approaching vehicle is out

of view.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands