Chrysler 2015 Town & Country Owner'S Manual Download Page 606

Page: 606 / 726

WARNING!

(Continued)

•

Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

•

To assure that compact spare tires, flat or inflated,
are securely stowed, compact spares must be
stowed with the valve stem facing the ground.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

NOTE:

Refer to the “Compact Spare Tire” section of

“Tires – General Information” for information about the

compact spare tire, its use, and operation.
1. Loosen (but do not remove) the wheel lug nuts by

turning them to the left one turn while the wheel is

still on the ground.

2. There are two jack engagement locations on each side

of the vehicle body. These locations are on the sill

flange of the vehicle body.

Jack Warning Label

604 WHAT TO DO IN EMERGENCIES

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands