Chrysler 2015 Town & Country Owner'S Manual Download Page 686

Page: 686 / 726

MAINTENANCE SCHEDULE

Your vehicle is equipped with an automatic oil change

indicator system. The oil change indicator system will

remind you that it is time to take your vehicle in for

scheduled maintenance.
Based on engine operation conditions, the oil change

indicator message will illuminate. This means that ser-

vice is required for your vehicle. Operating conditions

such as frequent short-trips, trailer tow, extremely hot or

cold ambient temperatures, and E85 fuel usage will

influence when the “Oil Change Required” message is

displayed. Severe Operating Conditions can cause the

change oil message to illuminate as early as 3,500 miles

(5,600 km) since last reset. Have your vehicle serviced as

soon as possible, within the next 500 miles (805 km).
Your authorized dealer will reset the oil change indicator

message after completing the scheduled oil change. If a

scheduled oil change is performed by someone other

than your authorized dealer, the message can be reset by

referring to the steps described under “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information.

NOTE:

Under no circumstances should oil change inter-

vals exceed 10,000 miles (16,000 km) or twelve months,

whichever comes first.

Severe Duty All Models

Change Engine Oil at 4000 miles (6,500 km) if the vehicle

is operated in a dusty and off road environment. This

type of vehicle use is considered Severe Duty.

Once A Month Or Before A Long Trip:

•

Check engine oil level.

•

Check windshield washer fluid level.

N
A

N
C

C
H

D
U

E
S

684 MAINTENANCE SCHEDULES

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands