Chrysler 2015 Town & Country Owner'S Manual Download Page 373

Page: 373 / 726

To increase the speed of disc loading, it is recommended

to use CD-R media and single-session discs. To create a

single-session disc, enable the “Disc at Once” option

before writing to the disc.

Operation Instructions — Auxiliary Mode

The auxiliary (AUX) jack is an audio input jack, which

allows the user to plug in a portable device, such as an

MP3 player, or iPod®, and utilize the vehicle’s audio

system to amplify the source and play through the

vehicle speakers.

Pushing the DISC/AUX button will change the mode to

auxiliary device if the AUX jack is connected.

NOTE:

The AUX device must be turned on and the

device’s volume set to proper level. If the AUX audio is

not loud enough, turn the device’s volume up. If the AUX

audio sounds distorted, turn the device’s volume down.

TIME Button (Auxiliary Mode)

Push this button to change the display to time of day. The

time of day will display for five seconds (when ignition is

OFF).

UNDERSTANDING YOUR INSTRUMENT PANEL 371

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands