Chrysler 2015 Town & Country Owner'S Manual Download Page 247

Page: 247 / 726

HEATED STEERING WHEEL — IF EQUIPPED

The steering wheel contains a heating element that helps

warm your hands in cold weather. The heated steering

wheel has only one temperature setting. Once the heated

steering wheel has been turned on it will operate for

approximately 30 to 80 minutes before automatically

shutting off. The heated steering wheel can shut off early

or may not turn on when the steering wheel is already

warm.
The heated steering wheel control button is located on

the center of the instrument panel below the climate

controls.

•

Press the heated steering wheel button

once to

turn the heating element ON.

•

Press the heated steering wheel button

a second

time to turn the heating element OFF.

NOTE:

The engine must be running for the heated

steering wheel to operate.

Vehicles Equipped With Remote Start

On models that are equipped with remote start, the

heated steering wheel can be programed to come on

during a remote start. Refer to “Electronic Vehicle Infor-

mation Center (EVIC)” in “Understanding Your Instru-

ment Panel” for further information.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands