Chrysler 2015 Town & Country Owner'S Manual Download Page 59

Page: 59 / 726

To Disengage The Child Protection Door Lock

1. Open the sliding side door.
2. Slide the Child Protection Door Lock control outward

(away from the vehicle) to disengage the Child Pro-

tection Door Lock.

3. Repeat Steps 1 and 2 on the opposite sliding door (if

equipped).

NOTE:

•

After setting the Child Protection Door Lock system,

always test the door from the inside to make certain it

is in the desired position.

•

The power sliding side door switches will not open the

power sliding doors if the vehicle is in gear or the

vehicle speed is above 0 mph (0 km/h).

•

The power sliding door will operate from the outside

door handle, the RKE transmitter, the switches on the

overhead console, or the switches located on the

B-pillar trim panel, just in front of the power sliding

door when the shift lever is in PARK, regardless of the

child lock lever position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands