Chrysler 2015 Town & Country Owner'S Manual Download Page 552

Page: 552 / 726

“LOW TIRE” message will be displayed, a chime will

sound, and the EVIC will still display a flashing

pressure value and the

Inflate Tire to XX

message in

the graphic display.

•

After driving the vehicle for up to 20 minutes above

15 mph (24 km/h), the “Tire Pressure Monitoring

Telltale Light” will flash on and off for 75 seconds and

then remain on solid. In addition, the EVIC will

display a “SERVICE TPM SYSTEM” message for a

minimum of five seconds and then display dashes (- -)

in place of the pressure value.

•

For each subsequent ignition switch cycle, a chime will

sound, the “Tire Pressure Monitoring Telltale Light”

will flash on and off for 75 seconds and then remain on

solid, and the EVIC will display a “SERVICE TPM

SYSTEM” message for a minimum of five seconds and

then display dashes (- -) in place of the pressure value.

•

Once you repair or replace the original road tire, and

reinstall it on the vehicle in place of the compact spare,

the TPMS will update automatically. In addition, the

“Tire Pressure Monitoring Telltale Light” will turn off

and the graphic in the EVIC will display a new

pressure value instead of dashes (- -), as long no tire

pressure is below the low pressure warning limit in

any of the four active road tires.

NOTE:

The vehicle may need to be driven for up to 20

minutes above 15 mph (24 km/h) in order for the TPMS

to receive this information.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

This device may not cause harmful interference.

550 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands