Chrysler 2015 Town & Country Owner'S Manual Download Page 333

Page: 333 / 726

dealer as soon as possible. Refer to “Occupant Restraints”

in “Things To Know Before Starting Your Vehicle” for

further information.

16. Shift Lever Indicator

The Shift Lever Indicator is self-contained within the

instrument cluster. It displays the gear position of the

automatic transmission.

NOTE:

•

You must apply the brakes before shifting from

PARK.

•

The highest available transmission gear is displayed

in the lower right corner of the Electronic Vehicle

Information Center (EVIC) whenever the Electronic

Range Select (ERS) feature is active. Use the +/-

selector on the shift lever to activate ERS. Refer to

“Automatic Transmission” in “Starting And Operat-

ing” for further information.

17. Vehicle Security Light — If Equipped

This light will flash at a fast rate for approxi-

mately 15 seconds, when the vehicle security

alarm is arming, and then will flash slowly

until the vehicle is disarmed.

18. Brake Warning Light

This light monitors various brake functions,

including brake fluid level and parking brake

application. If the brake light turns on it may

indicate that the parking brake is applied, that

the brake fluid level is low, or that there is a problem with

the anti-lock brake system reservoir.
If the light remains on when the parking brake has been

disengaged, and the fluid level is at the full mark on the

master cylinder reservoir, it indicates a possible brake

hydraulic system malfunction or that a problem with the

Brake Booster has been detected by the Anti-Lock Brake

System (ABS)/Electronic Stability Control (ESC) system.

UNDERSTANDING YOUR INSTRUMENT PANEL 331

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands