Chrysler 2015 Town & Country Owner'S Manual Download Page 18

Page: 18 / 726

After turning the ignition switch to the ON/RUN posi-

tion, the Vehicle Security Light will turn on for three

seconds for a bulb check. If the light remains on after the

bulb check, it indicates that there is a problem with the

electronics. In addition, if the light begins to flash after

the bulb check, it indicates that someone used an invalid

Key Fob to start the engine. Either of these conditions will

result in the engine being shut off after two seconds.
If the Vehicle Security Light turns on during normal

vehicle operation (vehicle running for longer than 10

seconds), it indicates that there is a fault in the electron-

ics. Should this occur, have the vehicle serviced as soon

as possible by an authorized dealer.

CAUTION!

The Sentry Key® Immobilizer system is not compat-
ible with some aftermarket remote starting systems.

(Continued)

CAUTION!

(Continued)

Use of these systems may result in vehicle starting
problems and loss of security protection.

All of the Key Fobs provided with your new vehicle have

been programmed to the vehicle electronics.

Replacement Keys

NOTE:

Only Key Fobs that are programmed to the

vehicle electronics can be used to start and operate the

vehicle. Once a Key Fob is programmed to a vehicle, it

cannot be reprogrammed to any other vehicle.

CAUTION!

Always remove the Key Fobs from the vehicle and
lock all doors when leaving the vehicle unattended.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands