Chrysler 2015 Town & Country Owner'S Manual Download Page 119

Page: 119 / 726

3. Attach the lower hooks or connectors of the child

restraint to the lower anchorages in the selected seat-

ing position.

4. If the child restraint has a tether strap, connect it to the

top tether anchorage. See the section “Installing Child

Restraints Using the Top Tether Anchorage” for direc-

tions to attach a tether anchor.

5. Tighten all of the straps as you push the child restraint

rearward and downward into the seat. Remove slack

in the straps according to the child restraint manufac-

turer’s instructions.

6. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

How To Stow An Unused ALR Seat Belt:

When using the LATCH attaching system to install a

child restraint, stow all ALR seat belts that are not being

used by other occupants or being used to secure child

restraints. An unused belt could injure a child if they play

with it and accidentally lock the seat belt retractor. Before

installing a child restraint using the LATCH system,

buckle the seat belt behind the child restraint and out of

the child’s reach. If the buckled seat belt interferes with

the child restraint installation, instead of buckling it

behind the child restraint, route the seat belt through the

child restraint belt path and then buckle it. Do not lock

the seat belt. Remind all children in the vehicle that the

seat belts are not toys and that they should not play with

them.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands