Chrysler 2015 Town & Country Owner'S Manual Download Page 26

Page: 26 / 726

•

For vehicles not equipped with the EVIC, the Remote

Unlock feature can be enabled or disabled by perform-

ing the following steps:

1. Perform this operation while standing outside the

vehicle.

2. Push and hold the LOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer

than 10 seconds. Then, push and hold the UNLOCK

button while still holding the LOCK button.

3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle by push-

ing the LOCK/UNLOCK buttons on the RKE trans-

mitter with the ignition switch in the OFF position and

the Key Fob removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pushing the LOCK button on the RKE transmit-

ter while you are inside the vehicle will activate the

Vehicle Security Alarm. Opening a door with the Vehicle

Security Alarm activated will cause the alarm to sound.

Push the UNLOCK button to deactivate the Vehicle

Security Alarm.

Sound Horn With Remote Lock

This feature will cause the horn to chirp when the doors

are locked with the RKE transmitter. This feature can be

turned on or turned off. To change the current setting,

proceed as follows:

•

For vehicles equipped with the EVIC, refer to “Elec-

tronic Vehicle Information Center (EVIC)/Personal

Settings (Customer-Programmable Features)” in “Un-

derstanding Your Instrument Panel” for further infor-

mation.

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands