Chrysler 2015 Town & Country Owner'S Manual Download Page 52

Page: 52 / 726

Wind Buffeting

Wind buffeting can be described as the perception of

pressure on the ears or a helicopter-type sound in the

ears. Your vehicle may exhibit wind buffeting with the

windows down, or the sunroof (if equipped) in certain

open or partially open positions. This is a normal occur-

rence and can be minimized. If the rear windows are

open and buffeting occurs, open the front and rear

windows together to minimize the buffeting. If the

buffeting occurs with the sunroof open, adjust the sun-

roof opening to minimize the buffeting.

SLIDING SIDE DOOR

The sliding door may be opened from the inside or the

outside. Pull outward on the exterior handle to open the

sliding door. The sliding door inside handle functions by

rocking forward and back. Rocking the handle back-

wards opens the door and rocking forward releases the

hold open latch in order to close the door.

To keep your door operating properly, observe the fol-

lowing guidelines:

•

Always open the door smoothly.

•

Avoid high impacts against the door stop when open-

ing the door. This is very important when your vehicle

is parked on an incline as the door will slide faster in

the downhill direction.

•

There is a hold-open latch that is activated when the

sliding door is fully opened. This latch will keep your

sliding door open on any incline. To close the sliding

door after the hold-open latch is activated, you must

rock the inside handle forward or pull outward on the

exterior handle.

Always make sure that the sliding door is fully latched

anytime the vehicle is in motion.

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands