Chrysler 2015 Town & Country Owner'S Manual Download Page 81

Page: 81 / 726

The pretensioners are triggered by the Occupant Re-

straint Controller (ORC). Like the air bags, the preten-

sioners are single use items. A deployed pretensioner or

a deployed air bag must be replaced immediately.

Energy Management Feature

This vehicle has a seat belt system with an Energy

Management feature in the front seating positions that

may help further reduce the risk of injury in the event of

a collision. This seat belt system has a retractor assembly

that is designed to release webbing in a controlled

manner.

Automatic Locking Retractor (ALR) — If Equipped

The seat belts in the passenger seating positions may be

equipped with a switchable Automatic Locking Retractor

(ALR) which is used to secure a child restraint system.

For additional information, refer to “Installing Child

Restraints Using The Vehicle Seat Belt” under the “Child

Restraints” section of this manual. The table below

defines the type of feature for each seating position.

Second Row Captains Chair

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands