Chrysler 2015 Town & Country Owner'S Manual Download Page 173

Page: 173 / 726

required to enter your PIN followed with a pound, (3

7 4 6 #), you can push the Voice Command

button

and say, “3 7 4 6 # Send.” Saying a number, or

sequence of numbers, followed by “Send,” is also to be

used for navigating through an automated customer

service center menu structure, and to leave a number

on a pager.
You can also send stored Uconnect® phonebook entries

as tones for fast and easy access to voice mail and pager

entries. To use this feature, dial the number you wish to

call and then push the Voice Command

button and

say “Send.” The system will prompt you to enter the

name or number and say the name of the phonebook

entry you wish to send. The Uconnect® Phone will

then send the corresponding phone number associ-

ated with the phonebook entry, as tones over the

phone.

NOTE:

•

You may not hear all of the tones due to mobile phone

network configurations. This is normal.

•

Some paging and voice mail systems have system time

out settings that are too short and may not allow the

use of this feature.

Barge In — Overriding Prompts

The “Voice Command” button can be used when you

wish to skip part of a prompt and issue your voice

command immediately. For example, if a prompt is

asking “Would you like to pair a phone, clear a...,” you

could push the Voice Command

button and say,

“Pair a Phone” to select that option without having to

listen to the rest of the voice prompt.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands