Chrysler 2015 Town & Country Owner'S Manual Download Page 222

Page: 222 / 726

Left and right third row seats can be folded individually

or together. The third row power folding seat adjusts to

the following positions using the switch bank located on

the left rear trim panel:

NOTE:

•

Disconnect the center shoulder belt from the small

buckle and lower the head restraints before attempting

to fold/stow the power third row seats.

•

To abort seat operation while seat is in motion, press a

different seat position selector switch to stop the seat.

Once the seat stops moving, then the desired position

can be selected.

•

The third row power seat system includes obstacle

detection for safe operation. When the system detects

an obstacle, the motors will stop and reverse the

motion a short distance to move the seat away from

the obstacle. Should this occur, remove the obstacle

and press the button again, for the desired position.

Rear Panel Power Switch Bank

1 — Open To Normal

3 — Tailgate/Fold Flat

2 — Stow

4 — Right/Left Seats/Both Seats

220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands