Chrysler 2015 Town & Country Owner'S Manual Download Page 566

Page: 566 / 726

Overloading

The load carrying components (axle, springs, tires,

wheels, etc.) of your vehicle will provide satisfactory

service as long as you do not exceed the GVWR and the

front and rear GAWR.
The best way to figure out the total weight of your

vehicle is to weigh it when it is fully loaded and ready for

operation. Weigh it on a commercial scale to ensure that

it is not over the GVWR.
Figure out the weight on the front and rear of the vehicle

separately. It is important that you distribute the load

evenly over the front and rear axles.
Overloading can cause potential safety hazards and

shorten useful service life. Heavier axles or suspension

components do not necessarily increase the vehicle’s

GVWR.

Loading

To load your vehicle properly, first figure out its empty

weight, axle-by-axle and side-by-side. Store heavier items

down low and be sure you distribute their weight as

evenly as possible. Stow all loose items securely before

driving. If weighing the loaded vehicle shows that you

have exceeded either GAWR, but the total load is within

the specified GVWR, you must redistribute the weight.

Improper weight distribution can have an adverse effect

on the way your vehicle steers and handles and the way

the brakes operate.

NOTE:

Refer to the “Vehicle Certification Label” affixed

to the rear of the driver’s door for your vehicle’s GVWR

and GAWRs.

564 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands