Chrysler 2015 Town & Country Owner'S Manual Download Page 244

Page: 244 / 726

Rear Wiper And Washer

Rotating the rotary ring to the first detent activates the

rear intermittent wipers. To activate the washers, rotate

the rotary ring fully forward and the washers will spray

until the ring is released, and then resume the intermit-

tent interval.

NOTE:

Rear window wipers function in the intermittent

wiper speed only.

Rain Sensing Wipers — If Equipped

This feature senses moisture on the windshield and

automatically activates the wipers for the driver. This

feature is especially useful for road splash or overspray

from the windshield washers of the vehicle ahead. Rotate

the end of the multifunction lever to one of the five

intermittent wiper sensitivity settings to activate this

feature.

The sensitivity of the system is adjustable from the

multifunction lever. Wiper sensitivity position 3 has been

calibrated for best overall wiping sensitivity. If the opera-

tor desires more wiping sensitivity, they may select

sensitivity positions 4 or 5. If the operator desires less

wiping sensitivity, they may select sensitivity positions 2

or 1. Place the multifunction lever in the OFF position

when not using the system.

NOTE:

•

The Rain Sensing feature will not operate when the

wiper speed is in the low or high position.

•

The Rain Sensing feature may not function properly

when ice or dried saltwater is present on the wind-

shield.

•

Use of Rain-X® or products containing wax or silicone

may reduce rain sensor performance.

242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands