Chrysler 2015 Town & Country Owner'S Manual Download Page 519

Page: 519 / 726

NOTE:

•

P (Passenger) — Metric tire sizing is based on U.S.

design standards. P-Metric tires have the letter “P”

molded into the sidewall preceding the size designa-

tion. Example: P215/65R15 95H.

•

European — Metric tire sizing is based on European

design standards. Tires designed to this standard have

the tire size molded into the sidewall beginning with

the section width. The letter

is absent from this tire

size designation. Example: 215/65R15 96H.

•

LT (Light Truck) — Metric tire sizing is based on U.S.

design standards. The size designation for LT-Metric

tires is the same as for P-Metric tires except for the

letters “LT” that are molded into the sidewall preced-

ing the size designation. Example: LT235/85R16.

•

Temporary spare tires are designed for temporary

emergency use only. Temporary high pressure com-

pact spare tires have the letter “T” or “S” molded into

the sidewall preceding the size designation. Example:

T145/80D18 103M.

•

High flotation tire sizing is based on U.S. design

standards and it begins with the tire diameter molded

into the sidewall. Example: 31x10.5 R15 LT.

STARTING AND OPERATING 517

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands