Chrysler 2015 Town & Country Owner'S Manual Download Page 123

Page: 123 / 726

Installing A Child Restraint With A Switchable
Automatic Locking Retractor (ALR)

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to

recline the seat and/or raise the head restraint to get a

better fit. If the rear seat can be moved forward and

rearward in the vehicle, you may wish to move it to its

rear-most position to make room for the child seat.

You may also move the front seat forward to allow

more room for the child seat.

2. Pull enough of the seat belt webbing from the retractor

to pass it through the seat belt path of the child

restraint. Do not twist the belt webbing in the seat belt

path.

3. Slide the latch plate into the buckle until you hear a

“click”.

4. Pull on the webbing to make the lap portion tight

against the child seat.

5. To lock the seat belt, pull down on the shoulder part of

the seat belt until you have pulled all the seat belt

webbing out of the retractor. Then, allow the webbing

to retract back into the retractor. As the webbing

retracts, you will hear a clicking sound. This means the

seat belt is now in the Automatic Locking mode.

6. Try to pull the webbing out of the retractor. If it is

locked, you should not be able to pull out any web-

bing. If the retractor is not locked, repeat step 5.

7. Finally, pull up on any excess webbing to tighten the

lap portion around the child restraint while you push

the child restraint rearward and downward into the

vehicle seat.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands