Chrysler 2015 Town & Country Owner'S Manual Download Page 461

Page: 461 / 726

7. Auto Indicator

This indicates when the system is in Auto mode.

8. Right Front Seat Occupant Temperature Display

This display shows the temperature setting for the right

front seat occupant.

9. Front Defrost Button

Push and release to change the current setting, the

indicator illuminates when ON. Performing this function

will cause the ATC to switch into manual mode. The

blower will engage immediately if the Defrost mode is

selected.

10. Passenger Temperature Control Up/Down Button

Provides the passenger with independent temperature

control. Push the top button for warmer temperatures or

the lower button for cooler temperature settings.

11. Rear Control Button

Provides toggle operation between front control screen

and rear control screen. Push the button to activate the

rear climate control screen and allow the front seat

occupants control over the rear climate settings.

12. Rear Window Defrost

Push this button to turn on the rear window defroster

and the heated outside mirrors (if equipped). An indica-

tor in the button will illuminate when the rear window

defroster is on. The rear window defroster automatically

turns off after approximately 10 minutes.

13. Rear Lock

Push and release the Rear Lock button on the front ATC

panel to lock and unlock the rear climate controls.

UNDERSTANDING YOUR INSTRUMENT PANEL 459

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands