Chrysler 2015 Town & Country Owner'S Manual Download Page 482

Page: 482 / 726

To Turn Off The Engine Using ENGINE
START/STOP Button

1. Place the shift lever/gear selector in PARK, then press

and release the ENGINE START/STOP button.

2. The ignition switch will return to the OFF position.
3. If the shift lever/gear selector is not in PARK, the

ENGINE START/STOP button must be held for two

seconds or three short presses in a row with the

vehicle speed above 5 mph (8 km/h) before the engine

will shut off. The ignition switch position will remain

in the ACC position until the shift lever/gear selector

is in PARK and the button is pressed twice to the OFF

position. If the shift lever/gear selector is not in PARK

and the ENGINE START/STOP button is pressed

once, the EVIC (if equipped) will display a “Vehicle

Not In Park” message and the engine will remain

running. Never leave a vehicle out of the PARK

position, or it could roll.

NOTE:

If the ignition switch is left in the ACC or RUN

(engine not running) position and the transmission is in

PARK, the system will automatically time out after 30

minutes of inactivity and the ignition will switch to the

OFF position.

Keyless Enter-N-Go™ Functions — With Driver’s
Foot OFF The Brake Pedal/Clutch Pedal (In PARK
Or NEUTRAL Position)

The Keyless Enter-N-Go™ feature operates similar to an

ignition switch. It has three positions, OFF, ACC and

RUN. To change the ignition switch positions without

starting the vehicle and use the accessories follow these

steps starting with the ignition switch in the OFF posi-

tion:
1. Press the ENGINE START/STOP button once to

change the ignition switch to the ACC position,

480 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands