Chrysler 2015 Town & Country Owner'S Manual Download Page 332

Page: 332 / 726

NOTE:

•

The “ESC Off Indicator Light” and the “ESC

Activation/Malfunction Indicator Light” come on

momentarily each time the ignition switch is turned

to ON/RUN.

•

Each time the ignition is turned to ON/RUN, the

ESC system will be ON, even if it was turned off

previously.

•

The ESC system will make buzzing or clicking

sounds when it is active. This is normal; the sounds

will stop when ESC becomes inactive following the

maneuver that caused the ESC activation.

11. Electronic Stability Control (ESC) OFF Indicator
Light — If Equipped

This light indicates the Electronic Stability Con-

trol (ESC) is off.

12. Speedometer

Indicates vehicle speed.

13. Fuel Door Reminder

The arrow in this symbol is a reminder that the

Fuel Filler Door is located on the left side of the

vehicle.

14. Fuel Gauge

The pointer shows the level of fuel in the fuel tank when

the ignition switch is in the ON/RUN position.

15. Air Bag Warning Light

This light will turn on for four to eight seconds

as a bulb check when the ignition switch is first

turned to ON/RUN. If the light is either not on

during starting, stays on, or turns on while

driving, have the system inspected at an authorized

330 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands