Chrysler 2015 Town & Country Owner'S Manual Download Page 97

Page: 97 / 726

WARNING!

(Continued)

•

Relying on the Side Air Bags alone could lead to

more severe injuries in a collision. The Side Air

Bags work with your seat belt to restrain you

properly. In some collisions, Side Air Bags won’t

deploy at all. Always wear your seat belt even

though you have Side Air Bags.

NOTE:

Air bag covers may not be obvious in the interior

trim, but they will open during air bag deployment.

Side Impacts

In side impacts, the side impact sensors aid the ORC in

determining the appropriate response to impact events.

The system is calibrated to deploy the Side Air Bags on

the impact side of the vehicle during impacts that require

Side Air Bag occupant protection. In side impacts, the

Side Air Bags deploy independently; a left side impact

deploys the left Side Air Bags only and a right side

impact deploys the right Side Air Bags only.

The Side Air Bags will not deploy in all side collisions,

including some collisions at certain angles, or some side

collisions that do not impact the area of the passenger

compartment. The Side Air Bags may deploy during

angled or offset frontal collisions where the Advanced

Front Air Bags deploy.

Rollover Events

Side Air Bags are designed to activate in certain rollover

events. The ORC determines whether the deployment of

the Side Air Bags in a particular rollover event is appro-

priate, based on the severity and type of collision. Vehicle

damage by itself is not a good indicator of whether or not

Side Air Bags should have deployed.
The Side Air Bags will not deploy in all rollover events.

The rollover sensing-system determines if a rollover

event may be in progress and whether deployment is

appropriate. A slower-developing event may deploy the

seat belt pretensioners on both sides of the vehicle.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands