Chrysler 2015 Town & Country Owner'S Manual Download Page 163

Page: 163 / 726

Phonebook Download — Automatic Phonebook
Transfer From Mobile Phone

If equipped and specifically supported by your phone,

Uconnect® Phone automatically downloads names (text

names) and number entries from your mobile phone’s

phonebook. Specific Bluetooth® Phones with Phone

Book Access Profile may support this feature. See

Uconnect® website for supported phones.

•

To call a name from the Uconnect® Phonebook or

downloaded Phonebook, follow the procedure in “Call

by Saying a Name” section.

•

Automatic download and update, if supported, begins

as soon as the Bluetooth® wireless phone connection is

made to the Uconnect® Phone, for example, after you

start the vehicle.

•

A maximum of 2,000 entries per phone will be down-

loaded and updated every time a phone is connected

to the Uconnect® Phone.

•

Depending on the maximum number of entries down-

loaded, there may be a short delay before the latest

downloaded names can be used. Until then, if avail-

able, the previously downloaded phonebook is avail-

able for use.

•

Only the phonebook of the currently connected mobile

phone is accessible.

•

Either the mobile phone’s phonebook or the mobile

phone’s SIM card phonebook is downloaded.

•

This downloaded phonebook cannot be edited or

deleted on the Uconnect® Phone. These can only be

edited on the mobile phone. The changes are trans-

ferred and updated to Uconnect® Phone on the next

phone connection.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands