Chrysler 2015 Town & Country Owner'S Manual Download Page 53

Page: 53 / 726

NOTE:

The left side sliding door cannot be opened

while the fuel door is open. This feature operates only

when the sliding door is fully closed prior to opening the

fuel door.

Power Sliding Side Door — If Equipped

The power sliding door may be opened or

closed manually or by using the buttons on the

RKE transmitter, overhead console switch, or

rear door switch. Pulling the inside or outside

power sliding door handle will also power open or close

the power sliding door.

NOTE:

Pulling the outside power sliding door handle a

second time while the sliding door is power opening or

power closing will allow the sliding door to be opened or

closed manually.

Push the button on the RKE transmitter twice within five

seconds to open a power sliding door. When the door is

fully open, pushing the button twice within five seconds

a second time will close the door.
There are power sliding side door switches located on the

B-pillar trim panel, just in front of the power sliding door

for the rear seat passengers and in the overhead console

for the driver and passengers. Pushing the switch once

will open the power sliding door. If the switch is pushed

while the door is under a power cycle, the door will

reverse direction.

NOTE:

The power sliding side door must be unlocked

before the power sliding door switches will operate.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands