Chrysler 2015 Town & Country Owner'S Manual Download Page 470

Page: 470 / 726

When rear controls are locked by the front system, the

Rear Temperature Lock symbol on the temperature knob

is illuminated and any rear overhead adjustments are

ignored.

Rear Mode Control

Auto Mode

The rear system automatically maintains the correct

mode and comfort level desired by the rear seat occu-

pants.

Headliner Mode

Air comes from the outlets in the headliner. Each

of these outlets can be individually adjusted to

direct the flow of air. Moving the air vanes of the outlets

to one side will shut off the airflow.

Bi-Level Mode

Air comes from both the headliner outlets and the

floor outlets.

NOTE:

In many temperature positions, the Bi-Level

mode is designed to provide cooler air out of the head-

liner outlets and warmer air from the floor outlets.

Floor Mode

Air comes from the floor outlets.

Recirculation Control

When outside air contains smoke, odors, or

high humidity, or if rapid cooling is desired,

you may wish to recirculate interior air by

pushing the Recirculation control button. Re-

circulation mode should only be used temporarily. The

recirculation LED will illuminate when this button is

468 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands