Chrysler 2015 Town & Country Owner'S Manual Download Page 96

Page: 96 / 726

The SABICs and SABs (“Side Air Bags”) are designed to

activate in certain side impacts and certain rollover

events. The Occupant Restraint Controller (“ORC”) de-

termines whether the deployment of the Side Air Bags in

a particular side impact or rollover event is appropriate,

based on the severity and type of collision. Vehicle

damage by itself is not a good indicator of whether or not

Side Air Bags should have deployed.
Side Air Bags are a supplement to the seat belt restraint

system. Side Air Bags deploy in less time than it takes to

blink your eyes. Occupants, including children, who are

up against or very close to Side Air Bags can be seriously

injured or killed. Occupants, including children, should

never lean on or sleep against the door, side windows, or

area where the Side Air Bags inflate, even if they are in an

infant or child restraint.

Seat belts (and child restraints where appropriate) are

necessary for your protection in all collisions. They also

help keep you in position, away from inflating Side Air

Bags. To get the best protection from the Side Air Bags,

occupants must wear their seat belts properly and sit

upright with their backs against the seats. Children must

be properly restrained in a child restraint or booster seat

that is appropriate for the size of the child.

WARNING!

•

Side Air Bags need room to inflate. Do not lean
against the door or window. Sit upright in the
center of the seat.

•

Being too close to the Side Air Bags during deploy-
ment could cause you to be severely injured or
killed.

(Continued)

94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands