Chrysler 2015 Town & Country Owner'S Manual Download Page 289

Page: 289 / 726

This outlet can power cellular phones, electronics and

other low power devices requiring power up to

150 Watts. Certain high-end video games, such as Play-

station3 and XBox360 will exceed this power limit, as will

most power tools.
The power inverter is designed with built-in overload

protection. If the power rating of 150 Watts is exceeded,

the power inverter will automatically shut down. Once

the electrical device has been removed from the outlet,

the inverter should automatically reset. If the power

rating exceeds approximately 170 Watts, the power in-

verter may have to be reset manually. To reset the

inverter manually push the power inverter button OFF

and ON. To avoid overloading the circuit, check the

power ratings on electrical devices prior to using the

inverter.

WARNING!

To avoid serious injury or death:

•

Do not insert any objects into the receptacles.

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled, it may cause an electric
shock and failure.

CUPHOLDERS

There are cupholders located throughout the interior. All

liners are removable for cleaning. Pull the flexible liner

from the cupholder drawer or tray starting at one edge

for easy removal. Refer to “Cleaning The Instrument

Panel Cupholders” in “Maintaining Your Vehicle” for

further information.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands