Chrysler 2015 Town & Country Owner'S Manual Download Page 103

Page: 103 / 726

bag deployment or hitting a road obstacle, data that will

assist in understanding how a vehicle’s systems per-

formed. The EDR is designed to record data related to

vehicle dynamics and safety systems for a short period of

time, typically 30 seconds or less. The EDR in this vehicle

is designed to record such data as:

•

How various systems in your vehicle were operating.

•

Whether or not the driver and passenger safety belts

were buckled/fastened.

•

How far (if at all) the driver was pushing the accelera-

tor and/or brake pedal.

•

How fast the vehicle was traveling.

These data can help provide a better understanding of

the circumstances in which crashes and injuries occur.

NOTE:

EDR data are recorded by your vehicle only if a

non-trivial crash situation occurs; no data are recorded by

the EDR under normal driving conditions and no per-

sonal data (e.g., name, gender, age, and crash location)

are recorded. However, other parties, such as law en-

forcement, could combine the EDR data with the type of

personally identifying data routinely acquired during a

crash investigation.
To read data recorded by an EDR, special equipment is

required, and access to the vehicle or the EDR is needed.

In addition to the vehicle manufacturer, other parties,

such as law enforcement, that have the special equip-

ment, can read the information if they have access to the

vehicle or the EDR.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands