Chrysler 2015 Town & Country Owner'S Manual Download Page 450

Page: 450 / 726

The button located in the center of the left-hand switch

will tune to the next preset station that you have pro-

grammed in the radio preset push-button.

CD Player

Pushing the top of the switch once will go to the next

track on the CD. Pushing the bottom of the switch once

will go to the beginning of the current track, or to the

beginning of the previous track if it is within one second

after the current track begins to play.
If you push the switch up or down twice it plays the

second track; three times, it will play the third, etc.
The button in the center of the left-hand switch has no

function in this mode.

CD/DVD/Blu-ray™ Disc MAINTENANCE

To keep a CD/DVD/Blu-ray™ Disc in good condition,

take the following precautions:
1. Handle the disc by its edge; avoid touching the

surface.

2. If the disc is stained, clean the surface with a soft cloth,

wiping from center to edge.

3. Do not apply paper or tape to the disc; avoid scratch-

ing the disc.

4. Do not use solvents such as benzene, thinner, cleaners,

or anti-static sprays.

5. Store the disc in its case after playing.
6. Do not expose the disc to direct sunlight.
7. Do not store the disc where temperatures may become

too high.

448 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands