Chrysler 2015 Town & Country Owner'S Manual Download Page 369

Page: 369 / 726

CAUTION!

•

This CD player will accept 4–3/4 inch (12 cm) discs
only. The use of other sized discs may damage the
CD player mechanism.

•

Do not use adhesive labels. These labels can peel
away and jam the player mechanism.

•

The Uconnect® 130 is a single CD player. Do not
attempt to insert a second CD if one is already
loaded.

•

Dual-media disc types (one side is a DVD, the
other side is a CD) should not be used, and they can
cause damage to the player.

EJECT Button — Ejecting A CD

Push the EJECT button to eject the CD.

If you have ejected a disc and have not removed it within

10 seconds, it will be reloaded. If the CD is not removed,

the radio will reinsert the CD but will not play it.
A disc can be ejected with the radio and ignition OFF.

NOTE:

Ejecting with the ignition OFF is not allowed on

convertible or soft-top models (if equipped).

SEEK Button

Push the right SEEK button for the next selection on the

CD. Push the left SEEK button to return to the beginning

of the current selection, or return to the beginning of the

previous selection if the CD is within the first second of

the current selection. Pushing and holding the SEEK

button will allow faster scrolling through the tracks in

CD and MP3 modes.

TIME Button

Push this button to change the display from a large CD

playing time display to a small CD playing time display.

UNDERSTANDING YOUR INSTRUMENT PANEL 367

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands