Chrysler 2015 Town & Country Owner'S Manual Download Page 453

Page: 453 / 726

1. Left Front Temperature Control

Provides left front seat occupant with independent tem-

perature control. Turn left for cooler or right for warmer

temperature settings.

2. Rear Blower Control — If Equipped

Use this control to regulate the amount of air forced

through the rear system in any mode you select. The rear

blower speed increases as you move the control to the

right from the “O” (Off) position. There are seven blower

speeds. To allow the rear overhead control, turn blower

knob fully to the left, past The

off position into the

“REAR” control position.

3. Front Blower Control

Use this control to regulate the amount of air forced

through the system in any mode you select. The blower

speed increases as you move the control to the right from

the “O” (Off) position. There are seven blower speeds.

4. Rear Temperature Control — If Equipped

Provides temperature control for the rear cabin. Turn left

for cooler or right for warmer temperature settings in the

rear cabin.

5. Right Front Temperature Control

Provides right front seat occupant with independent

temperature control. Turn left for cooler or right for

warmer temperature settings.

6. Mix Mode

Air is directed through the floor, defrost and side

window demist outlets. This setting works best in

cold or snowy conditions that require extra heat at the

windshield. This setting is good for maintaining comfort,

while reducing moisture on the windshield.

UNDERSTANDING YOUR INSTRUMENT PANEL 451

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands