Chrysler 2015 Town & Country Owner'S Manual Download Page 188

Page: 188 / 726

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

VOICE COMMAND — IF EQUIPPED

Voice Command System Operation

The Uconnect® Voice Command system allows

you to control your AM, FM radio, disk player,

USB mass storage class device, iPod® family of

devices, Bluetooth® Streaming Audio Device,

satellite radio, and a memo recorder.

NOTE:

Take care to speak into the Voice Interface System

as calmly and normally as possible. The ability of the

Voice Interface System to recognize user voice commands

may be negatively affected by rapid speaking or a raised

voice level.

186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands