Chrysler 2015 Town & Country Owner'S Manual Download Page 240

Page: 240 / 726

NOTE:

Broken, muddy or obstructed headlights and

taillights of vehicles in the field of view will cause

headlights to remain on longer (closer to the vehicle).

Also, dirt, film and other obstructions on the windshield

or camera lens will cause the system to function improp-

erly.

To Activate

1. Select “Automatic High Beams — ON” through the

EVIC. Refer to “Electronic Vehicle Information Center

(EVIC)/Customer-Programmable Features” in “Un-

derstanding Your Instrument Panel” for further infor-

mation.

NOTE:

To opt out of the Advanced Auto High-Beam

Sensitivity Control (default) and enter Reduced High-

Beam Sensitivity Control (not recommended), toggle the

multifunction lever (high beam lever) 6 full on/off cycles

within 10 seconds of cycling the ignition to the ON

position. The system will return to the default setting

when the ignition is cycled to the OFF position.
2. Rotate the headlight switch counterclockwise to the

AUTO (A) position.

3. Push the multifunction lever away from you to switch

the headlights to the high beam position. Refer to

“Multifunction Lever” in this section for further infor-

mation.

NOTE:

This system will not activate until the vehicle is

at, or above, 25 mph (40 km/h).

238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands