Chrysler 2015 Town & Country Owner'S Manual Download Page 168

Page: 168 / 726

mobile phone. Push the Phone

button to place the

current call on hold and answer the incoming call.

NOTE:

The Uconnect® Phone compatible phones in the

market today do not support rejecting an incoming call

when another call is in progress. Therefore, the user can

only answer an incoming call or ignore it.

Making A Second Call While Current Call Is In
Progress

To make a second call while you are currently on a call,

push the Voice Command

button and say “Dial” or

“Call” followed by the phone number or phonebook

entry you wish to call. The first call will be on hold

while the second call is in progress. To go back to the

first call, refer to “Toggling Between Calls” in this

section. To combine two calls, refer to “Conference

Call” in this section.

Place/Retrieve A Call From Hold

To put a call on hold, push the Phone

button until

you hear a single beep. This indicates that the call is on

hold. To bring the call back from hold, push and hold

the Phone

button until you hear a single beep.

Toggling Between Calls

If two calls are in progress (one active and one on hold),

push the Phone

button until you hear a single beep,

indicating that the active and hold status of the two

calls have switched. Only one call can be placed on

hold at a time.

Conference Call

When two calls are in progress (one active and one on

hold), push and hold the Phone

button until you

hear a double beep indicating that the two calls have

been joined into one conference call.

166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands