Chrysler 2015 Town & Country Owner'S Manual Download Page 160

Page: 160 / 726

•

Prior to giving a voice command, one must wait for the

beep, which follows the “Ready” prompt or another

prompt.

•

For certain operations, compound commands can be

used. For example, instead of saying “Setup” and then

“Pair a Device,” the following compound command

can be said: “Pair a Bluetooth Device.”

•

For each feature explanation in this section, only the

compound form of the voice command is given. You

can also break the commands into parts and say each

part of the command when you are asked for it. For

example, you can use the compound form voice com-

mand “Phonebook New Entry,” or you can break the

compound form command into two voice commands:

“Phonebook” and “New Entry.” Please remember, the

Uconnect® Phone works best when you talk in a

normal conversational tone, as if speaking to someone

sitting a few feet/meters away from you.

Voice Command Tree

Refer to “Voice Tree” in this section.

Help Command

If you need assistance at any prompt, or if you want to

know your options at any prompt, say “Help” following

the beep. The Uconnect® Phone will play some of the

options at any prompt if you ask for help.
To activate the Uconnect® Phone, simply push the Phone

button and follow the audible prompts for direc-

tions. Uconnect® Phone sessions begin with a push of

the Phone

button on the radio control head.

Cancel Command

At any prompt, after the beep, you can say “Cancel” and

you will be returned to the main menu. However, in a

few instances the system will take you back to the

previous menu.

158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands