Chrysler 2015 Town & Country Owner'S Manual Download Page 296

Page: 296 / 726

Second Row Floor Storage Bins

The area below the floor covers, located in front of the

second row seats, is available for storage.

Pull up on the storage bin latch to open the cover. Slide

the storage bin locking mechanism to the

unlocked

position to allow greater access to the storage bin.

CAUTION!

The storage bin cover must lay flat and be locked to
avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched.

•

Do not drive the vehicle with the storage bin covers
open.

•

Keep the storage bin covers closed and latched
while the vehicle is in motion.

(Continued)

Storage Bin Cover Lock Release

294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands